top of page

How to Install a Maxi-Cosi Pearl - a parental guide for Cars and Taxis

Traveling with children in taxis or rental cars can feel stressful — especially when you need to install a car seat quickly and safely. The Maxi-Cosi Pearl is one of the most popular toddler seats (suitable from about 12 months to 4 years), and it’s designed to be used with an ISOFIX base such as the FamilyFix3 or 3wayFix.


Whether you’re hopping into a taxi in Lisbon, Barcelona, or Rome, or setting up in your own car, here’s everything you need to know about installing the Maxi-Cosi Pearl safely.


Step-by-Step: Installing the Maxi-Cosi Pearl


The Maxi-Cosi Pearl cannot be installed with just a seatbelt — it must be used with an ISOFIX base. That’s why, when booking a family taxi with TaxiBambino.com, we make sure your taxi is equipped with the correct base if you request this seat.

  1. Place the ISOFIX base on the seat

    • Position the base on the car’s back seat.

    • Look for the ISOFIX anchor points (usually marked with small plastic covers between the seat cushions).

  2. Attach the ISOFIX connectors

    • Push the connectors of the base into the ISOFIX anchor points until you hear a click.

    • Check the indicators on the base — they should turn green when properly attached.

  3. Adjust the support leg

    • Extend the leg of the base to the floor of the car.

    • The indicator will turn green when the leg is firmly in place.

  4. Attach the Maxi-Cosi Pearl to the base

    • Place the Pearl onto the base and push down until it clicks.

    • Again, check the safety indicators — green means good to go.

  5. Check recline position

    • Adjust the recline depending on whether your child is sleeping or sitting upright.

    • For long taxi rides, a slightly reclined position is usually most comfortable.


🎥 Installation Video

Here’s a short video guide from Maxi-Cosi showing exactly how to install the Pearl with its ISOFIX base. You can watch it directly below: https://www.youtube.com/watch?v=2eov8uXT0Uk&pp=0gcJCdgAo7VqN5tD


Tips for Installing in a Taxi

  • Request the right seat in advance: When booking with TaxiBambino.com, you can specify that you need a Maxi-Cosi Pearl with ISOFIX base.

  • Check before you go: Not all taxis are ISOFIX-equipped. Always confirm with your driver or booking service.

  • Practice once at home: If you own a Pearl, try installing it in your own car so you’re confident when traveling abroad.

  • Rear-facing is safest: Keep your child rear-facing for as long as possible, at least until 15 months, ideally up to 4 years.


Why Parents Choose TaxiBambino

Installing a car seat in a busy taxi line can be stressful. By booking a family taxi with child seats in advance through TaxiBambino.com, you’ll know your ride comes prepared with the right equipment — no last-minute worries.


FAQ

❓ Can the Maxi-Cosi Pearl be installed with a seatbelt?👉 No. The Pearl only works with an ISOFIX base (FamilyFix, FamilyFix3, 3wayFix).

❓ Can I use the Pearl from birth?👉 No. It’s designed for children 61–105 cm (about 9 months–4 years). For newborns, use the Maxi-Cosi CabrioFix or Pebble.

❓ Do taxis in Europe always have ISOFIX?👉 Many newer taxis do, but not all. Always book in advance with TaxiBambino to ensure an ISOFIX-equipped vehicle.

 
 
 

Comments


Följ oss
  • Facebook Basic Square
  • Twitter Basic Square
  • Google+ Basic Square
bottom of page